Pellet mills
MABRIK pellet mills are built of highly robust and top quality materials. High dynamic and static load bearings have been incorporated into the design, making it possible to work with maximum reliability under extreme conditions such as those that occur when milling alfalfa, by-products, waste, wood, etc.
Taking into account all the possible pellet milling sectors, MABRIK has created different construction lines.
- Compact design pellet mills, with motor positioned in the upper part of the machine, high performance V-belt drive, and safety slide control (BELT SAFETY DEVICE), which ensure smooth operation within a reduced installation space, thus increasing operational manoeuvrability.
- Pellet mills from 180 CV, which by applying all the advantages of the previous design have an additional second drive thus obtaining the best speed for each requirement. For pellet mills from 340 CV, the secondary and Central Unit drive is carried out with A SINGLE HIGH- PERFORMANCE COGGED BELT able to transmit up to 1200 CV.
- Pellet mills with double drive, that enable reaching the minimum speeds necessary for the most difficult products, with the motor positioned in the upper part of the machine. There are no space limitations for these types of installations.
The product entry point and the pressing chamber together with the door are made of STAINLESS STEEL. The Pellet Mill door has a time delay safety sensor, which makes it impossible to open until the die and the rollers have come to a complete standstill.
All models have a relief valve and can be supplied with different die widths, and with two or three rollers, depending on the product to be pressed.
Different feeders-conditioners can be added to each model, depending on the requirements or products to be processed.
